 The MARINE ELECTRONIC EXPERTS |
(800)787-8401
(954) 584-6000 |
 |
| |
|
 |
|
| |
ICOM Products - For Pricing Information Contact US
We offer a complete selection of Icom Products. Need something special? Ask us |
Click below links to view brochures |
 |
|
|
|
| General |
|
Frequency range
Tx
Rx
|
156.025–157.425MHz
156.050–163.275MHz
|
| Usable channels |
USA, CAN, INT, WX channels |
| Type of emission |
16K0G3E, 16K0G2B
|
| Power supply |
13.8V DC ±15% |
Current drain (at 13.8V DC)
Tx
Rx |
5.5A (at 25W output)
1.5A (at AF max.) |
| Operating temperature range |
–20°C to +60°C;
–4°F to +140°F
|
| Antenna impedance : |
50Ω (SO-239) |
Dimensions (W×H×D,
projections not included) |
153×67×133mm ;
61⁄32×25⁄8×51⁄4 in.
|
| Weight (approx.) |
825g; 1.8lb |
| NMEA formats |
NMEA version 2.0 or 3.01
RMC, GGA, GNS, GLL
|
| Transmitter |
| Output power |
25W or 1W (at 13.8V DC) |
| Modulation system |
Variable reactance frequency modulation |
| Max. freq. deviation |
±5kHz |
| Frequency error |
±10ppm |
| Spurious emissions |
Less than –70dBc (at 25W) |
| Adj. channel power |
More than 70dB |
| Audio harmonic distortion |
Less than 10% (at 60% dev.) |
| Residual modulation |
More than 40dB |
| Receiver |
| Intermediate freq. |
1st 21.7MHz, 2nd 450kHz |
| Sensitivity |
0.22μV typical at 12dB SINAD |
| Squelch sensitivity |
Less than 0.22μV |
| Adj. Ch. selectivity |
More than 70dB |
| Spurious response |
More than 70dB |
| Intermodulation |
More than 70dB |
| Hum and noise |
More than 40dB |
| Audio output power |
4.5W typical at 10% distortion with a 4Ω load |
Measurements made in accordance with TIA/EIA 603. All stated specifi cations are subject to change without notice or obligation.
Color versions
Supplied accessories
- Hand microphone
- DC power cable
- Mounting bracket kit
Dimensions
Rear Panel Connections
|
|
|
 |
VHF Marine Transmitter IC-M422 |
|
|
| General |
|
Frequency range
Tx
Rx
|
156.025 - 157.425MHz
156.050 - 163.275MHz |
| Usable channels |
USA, INT, CAN, WX channels |
| Type of emission |
16K0G3E (FM), 16K0G2B (DSC) |
| Power supply requirement |
13.8V DC ±15% |
|
Current drain (at 13.8V DC)
Tx
Rx
|
5.5A (at 25W output)
1.5A (at AF max.)
|
| Operating temp. range |
–20°C to +60°C,
–4°F to +140°F
|
| Antenna impedance |
50Ω (SO-239) |
|
Dimensions
(projections not included)
|
164(W) × 78(H) × 139.3(D) mm
615⁄32(W) × 31⁄16(H) × 515⁄32(D)in.
|
| Weight (approx.) |
1070g; 2.4lb |
| NMEA In/out formats |
RMC, CGA, GNS, GLL |
| Transmitter |
| Output power |
25W, 1W (at 13.8V DC) |
| Modulation system |
Variable reactance freq. mod. |
| Max. freq. deviation |
± 5.0kHz |
| Frequency error |
± 10.0ppm (-20°C to +60°C) |
| Spurious emissions |
Less than –70dBc |
| Residual modulation |
More than 40dB |
| Adjacent Ch. power |
More than 70dB |
| Audio frequency response |
+1dB to -3dB of 6dB octave from 300Hz to 2500Hz |
| Receiver |
| Intermediate freq. |
1st 21.7MHz, 2nd 450kHz |
| Sensitivity |
0.22µV typical at 12dB SINAD |
| Squelch sensitivity |
Less than 0.22uV |
| Adjacent Ch. selectivity |
More than 70dB |
| Spurious response |
More than 70dB |
| Intermodulation |
More than 70dB |
| Hum and noise ratio |
More than 40dB |
| Audio output power |
4.5W typical at 10% distortion with a 4Ω load |
| Audio frequency response |
+1dB to -3dB of 6dB octave from 300Hz to 2500Hz |
All stated specifications are subject to change without notice or obligation.
Supplied Acessories
- Hand microphone, HW-150B/SW
- DC Power Cable
- Mounting bracket kit
See the Specification sheet for more information |
|
|
 |
VHF Marine Transmitter IC-M504 |
|
|
| General |
Frequency range
Tx
Rx
|
156.025 - 157.425MHz
156.050 - 163.275MHz |
| Type of emission |
16K0G3E, 16K0G2B |
| Usable channels |
USA, INT, CAN, WX channels |
| Power supply requirement |
13.8V DC ±15% |
Current drain (at 13.8V DC)
Transmit
Receive |
5.5A (25W output)
1.5A (Max. AF) |
| Operating temperature range |
–20°C to +60°C;
–4°F to +140°F
|
| Antenna impedance |
50Ω (SO-239) |
Dimensions (W×H×D)
(projections not included) |
165 × 110 × 123.2 mm
61⁄2×411⁄32×427⁄32 in. |
| Weight (approx.) |
1.45kg; 3.20 lb |
NMEA formats
Input
Output |
RMC, CGA, GNS, GLL
DSC, DSE |
| Transmitter |
| Output power |
25W or 1W (at 13.8V DC) |
| Modulation system |
Variable reactance |
| Max. freq. deviation |
± 5.0kHz |
| Frequency error |
± 10.0ppm |
| Spurious emissions |
Less than -70dBc (at 25W) |
| Residual modulation |
More than 40dB |
| Adjacent channel power |
More than 70dB |
| Receiver |
Intermediate freq.
1st
2nd |
21.7MHz
31.05MHz (Ch 70)
450KHz |
| Sensitivity |
0.22µV typical (at 12db SINAD) |
| Squelch sensitivity |
0.32µV typical (threshold) |
| Adjacent Ch. selectivity |
80dB typical (DSC 75dB) |
| Spurious response |
80dB typical (DSC 75dB) |
| Intermodulation rejection |
80dB typical (DSC 75dB) |
| Hum and noise ratio |
More than 40dB |
| Audio output power |
4.5W typ. at 10% distortion with a 4Ω load |
Measurement made in accordance with TIA/EIA-603. All stated specifications are subject to change without notice or obligation.
Supplied Acessories
- Hand Microphone
- DC Power Cable
- Spare Fuses
- Mounting Bracket
See the Specification sheet for more information |
|
|
 |
VHF Marine Transmitter IC-M604 |
|
|
| General |
Frequency range
Tx
Rx |
156.025–157.425MHz
156.050–163.275MHz |
| Type of emission |
16K0G3E, 16K0G2B |
| Usable channels |
USA, INT, CAN, WX channels |
| Power supply requirement |
13.8V DC ±15% |
Current drain (at 13.8V DC)
Transmit
Receive |
5.5A (25W output)
1.5A (Max. audio) |
| Operating temperature range |
–20°C to +60°C ;
–4°F to +140°F |
| Antenna impedance |
50Ω (SO-239) |
Dimensions (W×H×D)
(projections not included) |
220×110×109.4 mm;
821⁄32×411⁄32×45⁄16 in. |
| Weight (approx.) |
1.4kg ; 3.09 lb |
NMEA formats
Input
Output |
RMC, GGA, GNS, GLL, VTG
DSC, DSE |
| Transmitter |
| Output power |
25W or 1W (at 13.8V DC) |
| Modulation system |
Variable reactance |
| Max. Freq. deviation |
±5.0kHz |
| Frequency error |
±0.3kHz |
| Spurious emissions |
Less than –70dBc |
| Residual modulation |
More than 40dB |
| Adjacent Ch. power |
More than 70dB |
| Receiver |
Intermediate freq.
1st
2nd |
30.15MHz
21.7MHz (Ch70)
450kHz |
| Sensitivity |
0.22μV typ. (at 12dB SINAD) |
| Squelch sensitivity |
Less than 0.32μV (threshold) |
| Adjacent Ch. selectivity |
More than 80dB |
| Spurious response |
More than 80dB |
| Intermodulation |
More than 80dB |
| Hum and noise |
More than 40dB |
| Audio output power |
5.0W typ. at 10% distion
with a 4Ω load |
Applicable U.S. Military Specifications
The IC-M604 and HM-162B/SW have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard |
MIL 810 C |
MIL 810 D |
MIL 810 E |
MIL 810 F |
| Low Pressure |
500.1 |
I |
500.2 |
I, II |
500.3 |
I, II |
500.4 |
I, II |
| High Temp. |
501.1 |
I |
501.2 |
I, II |
501.3 |
I, II |
501.4 |
I, II |
| Low Temp. |
502.1 |
I |
502.2 |
I, II |
502.3 |
I, II |
502.4-3 |
I, II |
| Temp. Shock |
503.1 |
I |
503.2 |
I |
503.3 |
I |
503.4 |
I |
| Solar Radiation |
505.1 |
I |
505.2 |
I |
505.3 |
I |
505.4 |
I |
| Rain |
506.1 |
I, II |
506.2 |
I, II |
506.3 |
I, II |
506.4 |
I, II |
| Humidity |
507.1 |
I, II |
507.2 |
II, III |
507.3 |
II, III |
507.4 |
– |
| Salt Fog |
509.1 |
I |
509.2 |
I |
509.3 |
I |
509.4 |
– |
| Dust Blowing |
510.1 |
I |
510.2 |
I |
510.3 |
I |
510.4 |
I |
| Vibration |
514.2 |
VIII, X |
514.3 |
I |
514.4 |
I |
514.5 |
I |
| Shock |
516.2 |
I, II, V |
516.3 |
I, IV |
516.4 |
I, IV |
516.5 |
I, IV |
Measurements made in accordance with TIA/EIA 603. All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Hand microphone
- DC power cable
- Mounting bracket kit
See the Specification sheet for more information |
|
|
 |
COMMANDMICIII® Complete Remote-Control Option |
|
|
IP-X8 submersible, plug-and-play connectivity, controls all function (including DSC) of Icom's IC-M504 or IC-604 VHF marine radios. Large LCD with adjustable lighting level. Doubles as an intercom. IC-604 accepts up to 2 COMMANDMICIIIs. It's like getting a second (or third) on-board radio station for the cost of an accessory.
Instructions for using the COMMANDMICIII are included as part of the IC-M504 and IC-M604 instruction manuals.
Other features
- The COMMANMICIII® (HM-162B/SW) remote-control microphone size (W × H × D): 65.5 × 150 × 38 mm; 2.5 × 6 × 1.5 in.
- Weight (approx.; except cables): 13.6 oz.
- Supplied accessories:
6.1m (20ft) of cable, OPC-1540, with external speaker terminal
Microphone hanger
Mounting base for cable connector
|
|
|
 |
IC-M700PRO SSB Radio Telephone |
|
|
| General |
|
Frequency coverage
Rx
Tx
|
0.5 - 29.9999 MHz
1.6 - 2.9999 MHz
4.0 - 4.9999 MHz
6.0 - 6.9999 MHz
8.0 - 8.9999 MHz
12.0 - 13.9999 MHz
16.0 - 17.9999 MHz
18.0 - 19.9999 MHz
22.0 - 22.9999 MHz
25.- 27.5000 MHz
|
| Mode |
USB, AM, CW, FSK and AFSK |
| Number of channels |
150 (max.; 3 groups of 50 channels each) |
| Antenna impedance |
SO-239 (50Ω) |
| Power supply requirement |
13.6 V DC ±15% |
|
Current drain
(at 13.6 V DC)
|
| Tx |
max. power |
30 A typ |
| Rx |
max. audio output |
2.5 A |
|
|
Operating temperature
Guaranteed range
|
-30°C to +60°C
-22°F to +140°F
-20°C to +60°C
-4°F to +140°F)
|
| Frequency stability |
±10 Hz (0.5-14.9999 MHz)
±20 Hz (15-29.9999 MHz)
|
|
Dimensions
(projections not included)
|
291.4(W) × 116.4(H) × 315(D) mm
1115/32(W) × 419/32(H) × 1213/32(D) in
|
| Weight |
7.9 kg; 17 lb 7 oz |
| Remote connector |
NMEA D-sub 9-pin (female) |
| ACC 1 connector |
DIN 8-pin (female) |
| ACC 2 connector |
DIN 7-pin (female) |
| Transmitter |
| Output power |
150 W PEP (below 24 MHz)
60 W PEP (above 24 MHz)
|
| Spurious emissions |
-75 dB typical |
| Unwanted sideband |
70 dB typical |
| Carrier suppression |
65 dB typ. |
| Microphone impedance |
8-pin connector (600 Ω) |
| Receiver |
|
Sensitivity
USB, CW, FSK, AFSK
(for 12 dB SINAD)
AM *AM
(for 10dB S/N)
|
6.3µV (0.5-1.5999 MHz)
1 µV (1.6-1.7999 MHz)
0.35 µV typical( 1.8-29.9999 MHz)
32 µV (0.5-1.5999 MHz)
6.3 µV (1.6-1.7999 MHz)
2.2 µV typical (1.8-29.9999 MHz)
|
| Spurious response rejection ratio |
80dB typ. (1.6 - 29.9999MHz) |
|
Audio output power
(at 13.8 V DC)
|
5 W typ. at 10% distortion with a 4 Ω load |
| Clarity variable range |
±150Hz |
| External speaker jack |
2-conductor 6.5 (d) mm (1⁄4″)/4-8 Ω |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Hand microphone
- DC power cable
- ACC plugs
- Mounting bracket kits
- Microphone hanger
- Speaker plug
- Spare fuses
|
|
|
 |
ICOM IC-M710 HF Marine Transceiver |
|
|
| General |
Frequency coverage
Recieve
Transmit* |
0.500 - 29.999 MHz
1.6 - 27.5 MHz
* Restrictions may apply depending on version |
| Mode (varies with country) |
J3E (USB), H3E, R3E, J2B (AFSK), F1B (FSK) R3E, A1A (CW)
available modes may differ depending on version
|
| Number of channels |
1136 (max.)
(160 programmable; 242 ITU SSB duplex; 72 ITU SSB simplex; 662 ITU FSK duplex) |
| Antenna impedance |
50Ω (nominal) |
| Usable temperature range |
-30°C to +60°C;
-22°F to +140°F |
| Frequency stability |
±10 Hz (-30°C to +60°C: ±20 Hz above 15 MHz for General and Marine versions) |
| Power supply requirement |
13.6 V DC ±15%
(negative and floating grounds are available depending on version) |
|
Max. current drain
(at 13.6 V DC)
|
Transmit at max power 30 A
Receive at max. AF output 2.5 A (negative ground type)
Receive at max. AF output 3.0 A (floating ground type)
|
| Dimensions (proj. not incl.) |
291.4 × 116.4 × 315 mm
1115⁄32× 419⁄32× 1213⁄32 in
|
| Weight |
7.9 kg (17 lb 7 oz; negative ground type)
8.1 kg (17 lb 14 oz; floating ground type) |
| Transmitter |
Output power
U.S.A. version
Europe version |
150, 60, 20 W PEP (selectable)
(60, 20 W only for 25 MHz band)
150, 60 W PEP (selectable)
(60 W only for 25 MHz band)
|
| Spurious emissions |
-60 dB (Europe version)
-65 dB (USA version) |
| Carrier suppression |
40 dB |
| Unwanted sideband supression |
55 dB |
| Microphone impedance |
600Ω |
| Receiver |
|
Sensitivity
J3E, R3E, J2B, F1B, A1A
(for 12 dB SINAD)
H3E
(for 10 dB S/N)
|
0.5 μV (1.8–29.9999 MHz)
1 μV (1.6–1.7999 MHz)
6.3 μV (0.5–1.5999 MHz)
3.2 μV (1.8–29.9999 MHz)
6.3 μV (1.6–1.7999 MHz)
32 μV (0.5–1.5999 MHz)
|
| Spurious rejection ratio |
70 dB (1.6–29.9999 MHz) |
| Audio output power |
4.5 W at 10% distortion with a 4 Ω load |
| Audio output impedance |
4 to 8 Ω |
| Clarity variable range |
±150 Hz |
All stated specifications are subject to change without notice or obligation.
|
|
|
 |
IC-M802 HF Marine Transceiver |
|
|
| General |
|
Frequency coverage
Rx
Tx
|
(unit: MHz)
0.5– 29.9999 (continuous)
1.6– 2.9999, 4.0– 4.9999, 6.0– 6.9999
8.0– 8.9999, 12.0– 13.9999, 16.0– 17.9999
18.0– 19.9999, 22.0– 22.9999, 25.0– 27.5000
|
| Type of emission |
J3E (SSB), J2B (AFSK), F1B
(FSK), A1A (CW), H3E (AM*)
*Rx only
|
| Number of channels |
1355 (max.)
(160 programmable channels; 249 ITU SSB duplex; 72 ITU
SSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU
4MHz simplex; 31 ITU 8MHz simplex) |
| Antenna impedance |
50Ω (SO-239) |
| Power supply requirement |
13.6V DC ±15% |
|
Max. current drain
(at 13.6V DC)
|
Tx (Max. power) 30A (typ.)
Rx (Max. audio) 3.0A
|
Operating temp. range
Guaranteed range |
–30°C to +60°C; –22°F to +140°F
–20°C to +55°C; –4°F to +131°F
|
| Frequency stability |
±10Hz (at –20°C to +55°C) |
|
Dimensions
Main unit
Controller
Speaker
|
240×94×238.4mm; 97⁄16×31116×93⁄8in
220×110×84.4mm; 821⁄32×411⁄32×35⁄16in
110×110×84.4mm; 411⁄32×411⁄32×35⁄16in |
|
Weight
Main unit
Controller
Speaker
|
4.7kg; 10.36lb
570g; 1.26lb
370g; 0.81lb |
| Transmitter |
| Output power |
150, 60, 20W PEP (Selectable) |
| Spurious emissions |
–62dB |
| Unwanted sideband |
55dB |
| Carrier suppression |
40dB |
| Microphone impedance |
2.4kΩ |
| Receiver |
|
Sensitivity (at 10dB S/N)
|
| | J3E, A1A | J2B, F1B | H3E | DSC (J2B) |
| 0.5 – 1.5999MHz |
6.3µV |
— |
32µV |
0.5µV
(at 1% error rate) |
| 1.6 – 1.7999MHz |
0.89µV |
0.89µV |
6.3µV |
| 1.8 – 3.9999MHz |
0.5µV |
0.5µV |
3.2µV |
| 4.0 –29.9999MHz |
|
|
|
Spurious response
rejection ratio
|
| Tx/Rx |
(1.5-29.9999MHz) |
More than 70dB |
| DSC |
(Except 1st IF image) |
More than 50dB |
| DSC |
(1st IF image) |
More than 60dB |
|
| Audio output power |
4.0W at 10% distortion with a 4Ω load |
| Audio output impedance: |
4–8Ω |
| Clarity variable range |
±150Hz |
| GPS interface |
NMEA 0183 version 3.01 |
All stated specifications are subject to change without notice or obligation.
Supplied accessories
- Separation cable, OPC-1106 (5m; 16.4ft)
- Hand microphone, HM-135
- External speaker, SP-24
- Mounting bracket kits
- Microphone hanger
- DC power cables
- ACC plugs
- Spare fuse
System Overview
|
|
|
|
|
|
|
| |
| |
 |
 |
 |
 |
 |
 |
|
